Pairing Instructions - Salus Connected Wireless System Manual

Section 9

Pairing Instructions

Be sure the Smart Relay is located at or near its intended location to account for
potential radio interference.
Step 1. Be sure that there is power applied to the SC824ZB Smart Relay and the Status LED is repeating a sequence
of 3 red flashes then pause .
Step 2. Open the SALUS Smart Home application, select the drop-down menu from the upper
right of the screen and select: All Devices  Add New Device
Step 3. Press "Scan Devices . "
Module 2 – Wireless Accessories
SC824ZB Smart Relay – Low Voltage
After pressing "Scan for Equipment",
the SALUS Smart Home application
scans for devices .
Step 4. Check the box
for the Smart Relay and
press "Connect Devices" .
9-4