Table of Contents
Advertisement
Section 9
Installation – Adhesive Surface Mounting
Module 2 – Wireless Accessories
SC824ZB Smart Relay – Low Voltage
Step 1. Remove Smart Relay
from Mounting Kit .
Step 2. Wire the relay using the
appropriate diagram . Be sure to
use a jumper between R & COM
for Power Switching .
Step 3. Remove the white backing with no text
from the adhesive provided .
Step 4. Apply the adhesive to the back of the
Smart Relay at the bottom below the text .
Step 5. Remove the lettered backing from the
double-sided adhesive and apply the relay to
the desired surface .
9-3
Advertisement
Table of Contents
