Resetting Factory Defaults; Rejoining A Current Network; Led Indication - Salus Connected Wireless System Manual

Section 4

Resetting Factory Defaults

Step 1. First, delete the device
from the SALUS Smart Home
application . Select the device to
delete, choose the device title for
the configure screen .
LED

Rejoining a Current Network

If the network connection is intermittent and/or other Zigbee devices are added or deleted, it may
be necessary to for the SX885ZB Smart Plug to rejoin the network . To do this, press the multi button
5 times quickly (less than ½ second intervals) . The LED will begin 3 flash intervals, indicating it is
searching for a network to join .
LED Indications
Table 4.1 – LED Indications
LED Activity
ON for 2-4 seconds then OFF
3 flashes
ON
OFF
ON , flashes every 2 seconds
OFF , flashes every 2 seconds
Module 2 – Wireless Accessories
SX885ZB miniSmartPlug
Step 2. Scroll down below the
Schedule options and choose,
"Remove Shared Smart Plug" .
Multi
Button
Step 4. Press and hold the multi
button on the SX855ZB Smart Plug .
Step 5. When the LED illuminates,
release the button . The Smart Plug is
now read for pairing .
Description
Switch power up, Switch is OFF
Searching for network to join
Switch is ON
Switch is OFF
Switch is ON , no network detected
Switch is OFF , no network detected
Step 3. A notification will
appear warning that you are
about to delete the Smart Plug .
Press "Delete" to continue .
4-5