Battery Replacement - Salus Connected Wireless System Manual

Section 7

Battery Replacement

Step 1. Unscrew the
Sensor face plate by
turning it counter-
clockwise .
Battery Disposal
Module 2 – Wireless Accessories
SS901ZB Water Leak Sensor
If the battery is low, the Water Leak Sensor
icon on the SALUS Smart Home dashboard
will turn red and the Issue indicator will
register a message . Use only a CR2, 3 volt
lithium battery for replacement .
Step 2. Gently pull on
the positive end of the
battery and lift it out
of the Sensor body .
Lithium batteries are considered hazardous waste in most
municipalities . Dispose of the used lithium batteries in accordance
with all applicable local regulations .
Step 3. Insert the new
battery according to
the polarity markings
molded into the plastic
housing .
Step 4. Screw the face
plate on to the sensor
making sure the dots
are aligned to lock it .
7-6