Pairing Instructions - Salus Connected Wireless System Manual

Section 8

Pairing Instructions

Locate the SC904ZB Inline Shutoff Valve in or near the location that it will be installed to account
for radio interference
Step 1. Open the SALUS Smart Home application, select the drop-down menu from the upper
right of the screen and select: All Devices  Add New Device
Step 2. Press "Scan Devices . "
When the LED indicator begins flashing yellow in a 3 flash then pause cycle, the Inline Shutoff Valve is
searching for a network to join .
Since the SC904ZB Inline Shutoff Valve will likely be associated with a water leak sensor, it may
be convenient to pair both components at once. The following shows the Valve pairing with an
SS901ZB Water Leak Sensor.
Follow specific instructions to prepare additional devices for pairing .
Module 2 – Wireless Accessories
SC904ZB Inline Shutoff Valve
After pressing "Scan for Equipment",
the SALUS Smart Home application
scans for devices .
Step 3. Plug the power
adapter into the device
to power it .
8-2