Resetting Factory Defaults - Salus Connected Wireless System Manual

Section 2

Resetting Factory Defaults

Step 1. Select the SS881ZB
icon from the SALUS Smart
Home dashboard . After the
tile flips, choose the device
name in the upper left .
Step 4. Press and hold
the tamper switch while
re-inserting the battery .
Release the switch when the
LED plunger switch lights .
Module 2 – Wireless Accessories
SS881ZB Embedded Door Sensor
Step 2. Scroll to the bottom
of the next screen and select
"Remove shared door monitor . "
Step 5. Close the battery cover
and pair and name the Sensor as
described in Pairing Instructions .
Re-install the Sensor, making
sure it activates when the door
closes .
Step 3. Remove the Sensor from
the Sensor Sleeve and remove the
battery as described under Battery
Replacement .
Step 6. Follow the steps for pairing
shown in Pairing Instructions .
2-7