Salus Connected Wireless System Manual page 33

Section 6
Step 4. Select the check boxes
next to Temperature Sensor and
other associated devices . Press
"Connect Devices"
Step 7. Choose from setup
options specific to each device .
Press "Complete set up . "
A thermostat must be set to "EXT" temperature sensor in the setting menu and associated with a
Zigbee Temperature Sensor in the parameters menu for it to read the SS909AB Sensor. If the SS909ZB
Temperature Sensor does not connect with the thermostat, it may be necessary to do a find and bind
operation as follows.
Module 2 – Wireless Accessories
SS909ZB Temperature Sensor
Step 5. Enter a unique
descriptive name to identify
each device . Press "Next"
Step 8. Press "Finish" to
complete pairing .
Step 6. Press "Please click
here to setup . "
A new icon will appear on
your home screen . Since
the sensor is not installed it
shows the door open .
6-3