Salus Connected Wireless System Manual page 38

Section 7
Pairing Instructions
Locate the SS901ZB Water Leak Sensor in or near the location that it will be installed to account
for radio interference.
Step 1. Open the SALUS Smart Home application, select the drop-down menu from the upper
right of the screen and select: All Devices  Add New Device
Step 1. Press "Scan Devices . "
Since the SS901ZB Water Leak Sensor will likely be associated with a valve controller, it may be
convenient to pair both components at once. The following shows the Sensor pairing with an
SC904ZB Inline Shutoff Valve.
Follow specific instructions to prepare additional devices for pairing .
Module 2 – Wireless Accessories
SS901ZB Water Leak Sensor
Step 2. After pressing "Scan
for Equipment", the SALUS
Smart Home application scans
for devices .
Step 3. Unscrew the Sensor face
plate and remove the battery
tab to start the pairing process .
Replace the face plate making
sure it is locked and sealed .
7-2