Salus Connected Wireless System Manual page 31

Section 6
Overview
Wall Plate
Multi Button
Stand
Pair the SS909ZB Embedded Door Sensor with the SG888ZB Gateway prior to installation.
Parts Included / Installation Tools
Confirm that all required parts are present in the SS881ZB package:
Sensor w/ Wall Plate
and Battery (CR2, 3Vdc)
Confirm that required tools are available:
#1 Phillips
Screwdriver
(Optional)
Module 2 – Wireless Accessories
SS909ZB Temperature Sensor
Temperature Sensor
LED Indicator
Battery
Face Plate
Magnet
Item
Wall Plate
Stand
Face Plate
LED
Indicator
Tamper
Switch (not
shown)
Battery
Mounting Kit
1/16" Drill Bit
(Optional)
Description
Allows wireless mounting on
a wall at a location where the
temperature is most critical
Allows flexible location of the
wireless temperature sensor
Allows access to battery while
Sensor is mounted
"Hidden" LED indicates network
status during pairing
Detects if sensor is removed
from mounted location (Wall
Plate or Stand)
CR2 lithium battery
(3 volts dc)
Installation Quick-start Guide
Power Drill
(Optional)
6-1