Salus Connected Wireless System Manual page 10

Section 2
Step 4. Insert the Sensor into the Sensor
Sleeve using the Installation tool until the face
of the sensor is flush with the Sensor Sleeve .
If closing the door doesn't activate the Sensor and show a closed door on the SALUS Smart Home
application, turn the Sensor counter-clockwise in ¼ turn increments until it activates when the
door is closed.
Step 6. Once the Sensor is at the correct depth, align the Sensor slots with the grooves in the Sensor
Sleeve to prevent undesireable rotation .
Module 2 – Wireless Accessories
SS881ZB Embedded Door Sensor
Step 5. Close the door and make sure the
Sensor operates properly, with the SALUS
Smart Home application showing the correct
door position .
2-5