Salus Connected Wireless System Manual page 32

Section 6
Pairing Instructions
Locate the SS909ZB Temperature Sensor in or near the location that it will be installed to
account for radio interference.
Step 1. Open the SALUS Smart Home application, select the drop-down menu from the upper
right of the screen and select: All Devices  Add New Device
Step 2. Press "Scan Devices . "
Since the SS909ZB Temperature Sensor will be associated with a thermostat, it may be convenient
to pair both components at once. The following shows the Sensor pairing with an SC102ZB Wireless
Fan Coil Controller & ST103ZB Wireless Fan Coil Remote.
Follow specific instructions to prepare additional devices for pairing .
Module 2 – Wireless Accessories
SS909ZB Temperature Sensor
After pressing "Scan for Equipment",
the SALUS Smart Home application
scans for devices .
Step 3. Remove the
battery tab to start the
pairing process .
6-2