Salus Connected Wireless System Manual page 36

Section 6
Resetting Factory Defaults
Step 1. Select the SS909ZB
icon from the SALUS Smart
Home dashboard . After the
tile flips, choose the device
name in the upper left .
Step 4. Remove the
SS909ZB Sensor cover and
remove the battery .
Module 2 – Wireless Accessories
SS909ZB Temperature Sensor
Step 2. Scroll to the bottom of the
next screen and select "Remove
shared window monitor . "
Step 5. Press and
hold the Pair Button
while re-inserting the
battery .
Step 3. Notification that the
Sensor will be removed is
displayed . Press "Delete" to
continue . The SS909ZB Icon
will be removed from the
application .
Step 6. When the LED
illuminates, release the
Pair Button . The Sensor is
reset to factory defaults
and will respond to
pairing requests .
Step 7. Place
the face plate
on the Sensor .
6-6