Testing The Sensor - Salus Connected Wireless System Manual

Section 7

Testing the Sensor

SALUS Smart Home will show an alert indicating a water leak . Based on the automations and the devices
associated with the leakage, this may send a message (email or SMS text) and activate an associated
device such as the SC904ZB Inline Shutoff Valve . Removing the SS901ZB Sensor from the Stand and
returning it to the upright position will clear the alert and return associated devices to the desired status .
Module 2 – Wireless Accessories
SS901ZB Water Leak Sensor
Insert the sensor into the Stand with the centering
feature at 90 degrees from upright in either
direction . This will short the contacts on the Sensor .
7-5