Table of Contents
Advertisement
4
Replacing Assembly Units
8
4.1
Replacing the Printheads
i
Notice!
The replacement of both printheads can be done in the same manner.
1 4
Figure 2
Structure of the printhead
!
Attention!
The printhead can be damaged by static electricity discharges and impacts!
Ground your body, e.g. by wearing a grounded wristband.
Do not touch contacts on the plug connections (2, 3).
Do not touch printing line (5) with hard objects or your hands.
Figure 3
Printhead replacement 1
Removing the printhead
1. Open the printhead.
2. Remove labels and transfer ribbon from the printer.
3. Loosen the screw (7) and dismantle the antistatic brush (6).
4. Remove the printhead retainer screw (8).
2
6
7
3
1 Printhead
2 Connector (Data)
3 Connector (Power)
4 Threaded hole
5 Printing line
4
5
8
8
Advertisement
Table of Contents
