Replacing The Transport Rollers - CAB Hermes C Series Service Manual

4 Replacing Assembly Units
4.3

Replacing the Transport Rollers

i
Notice!
The replacement of both transport rollers can be done in the same manner.
Figure 8 Replacing the transport rollers
1. Swing the locking system (4) away from the transport roller (2).
2. Loosen the screw (3).
3. Remove the transport roller (2) from the axle (1).
4. Put the new roller onto the axle (1). Turn the roller easily to align it to the hexagonal end of the axle and push the
roller further until it stops.
5. Fix the roller (2) with the screw (3).
1
2 3 4 2 3 4
11