Replacing Assembly Units; Replacing The Printhead; Replacing The Printhead Xc4 - CAB XC Series Service Manual

8 4

Replacing Assembly Units

4.1

Replacing the Printhead

4.1.1

Replacing the Printhead XC4

The printhead of the label printer can be replaced without the need for fine adjustment. The printhead must be
replaced if worn.
4
1
Fig. 3 Structure of the printhead XC4
Attention!
!
The printhead assembly is precisely aligned at the factory.
 Do not loosen the screws (4) under any circumstances.
Attention!
!
The printhead can be damaged by static electricity discharges and impacts!
 Ground your body, e.g. by wearing a grounded wristband.
 Do not touch contacts on the plug connections (2, 3).
 Do not touch printing line (5) with hard objects or your hands.
6 1
Fig. 4 Replacing the printhead XC4
2
6
7
2 6 3 8
1 Printhead
3
2 Plug connection
3 Plug connection
4 Screw
5 Printing line
6 Pins
6
4
5
8