Replacing Assembly Units; Replacing The Printhead - CAB HERMES Q Series Service Manual

4

Replacing Assembly Units

8
4.1

Replacing the Printhead

The printhead of the label printer can be replaced without the need for fine adjustment. The printhead must be
replaced if worn or when switching to a printhead with higher or lower resolution.
3
4
Figure 2 Structure of the printhead
!
Attention!
The printhead can be damaged by static electricity discharges and impacts!
 Set up printer on a grounded, conductive surface.
 Ground your body, e.g. by wearing a grounded wristband.
 Do not touch contacts on the plug connections (1, 2).
 Do not touch heating line (5) with hard objects or your hands.
1
2
4
5
1 Data connector
3
2 Power connector
3 Threaded holes
4 Catching holes
5 Heating line
8