Checking Adjustable Values; Changing To Adjustment Mode - ProMinent SCKa Series Operating Instructions Manual

Changing adjustable values
Confirming adjustable values
Correcting incorrectly set digits

8.2 Checking adjustable values

8.3 Changing to adjustment mode

Press the arrow keys
ð The flashing digit or number counts up or down.
Under "change individual digits": confirm each digit by pressing the
[P] key.
ð Upon confirming the last individual digit, the display simultane‐
ously changes to the next menu option or into a continuous dis‐
play.
Under "change a number": Press the
ð The display simultaneously changes to the next menu option or
into a continuous display.
[i] key 2x.
Press the
ð You jump back to the first digit.
Before you adjust the pump control, you can check the actual settings of
the adjustable values:
[i] key ("i" for "Info"), if the LCD screen shows a contin‐
Press the
uous display (The display does not contain the
ð Each press of the
to the screen to another continuous display.
The number of continuous displays depends on the identity code, the
selected operating mode and the connected additional devices, see over‐
view "Continuous displays" in the appendix.
1. In a continuous display press the
ð The pump control changes to adjustment mode.
'CODE 1' was set, then after pressing the [P] key, the code must
2. If
first be entered.
The following menus can initially be chosen in adjustment mode - see also
"Operating/setting overview" in the appendix:
'MODE' menu
n
'CODE' menu (option)
n
'SET' menu
n
'CLEAR' window
n
[UP] or [DOWN] .
[P] key 1x.
[P] key symbol).
[i] key toggles the continuous display output
[P] key for at least 2 seconds.
Set up
27