Table of Contents
Advertisement
2
Safety chapter
Identification of safety notes
Warning signs denoting different types of
danger
Intended use
Qualification of personnel
The following signal words are used in these operating instructions to
denote different severities of danger:
Signal word
WARNING
CAUTION
The following warning signs are used in these operating instructions to
denote different types of danger:
Warning signs
Only use the pump to meter liquid metering chemicals.
n
Only use the pump after it has been correctly installed and started up
n
in accordance with the technical data and specifications contained in
the operating instructions.
Observe the general restrictions with regard to viscosity limits, chem‐
n
ical resistance and density - see also ProMinent Resistance List (in
the Product Catalogue or at www.prominent.com/en/downloads)!
All other uses or modifications are prohibited.
n
The pump is not intended for the metering of gaseous media or solids.
n
The pump is not intended for the metering of flammable feed chemi‐
n
cals.
The pump is not intended for operation in hazardous locations.
n
The pump is not intended for unprotected outside use.
n
The pump is only intended for industrial use.
n
The pump should only be operated by trained and authorised per‐
n
sonnel, see the following "Qualifications" table.
Observe the information contained in the operating instructions at the
n
different phases of the device's service life.
Action
Storage, transport, unpacking
Assembly
Safety chapter
Meaning
Denotes a possibly dangerous sit‐
uation. If this is disregarded, you
are in a life-threatening situation
and this can result in serious inju‐
ries.
Denotes a possibly dangerous sit‐
uation. If this is disregarded, it
could result in slight or minor inju‐
ries or material damage.
Type of danger
Warning – hand injuries.
Warning – high-voltage.
Warning – danger zone.
Qualification
Instructed person
Technical personnel, service
7
Advertisement
Table of Contents
