Repairs - ProMinent SCKa Series Operating Instructions Manual

Repairs

11 Repairs
Safety notes
44
WARNING!
It is mandatory that you read the safety information and
specifications in the "Storage, Transport and Unpacking"
chapter prior to shipping the pump.
CAUTION!
Warning of feed chemical spraying around
Feed chemical can spray out of the hydraulic components if
they are manipulated or opened due to pressure in the liquid
end and adjacent parts of the system.
– Disconnect the pump from the mains power supply and
ensure that it cannot be switched on again by unauthor‐
ised persons.
– Depressurise the system before commencing any work
on hydraulic parts.
WARNING!
Risk of fingers being crushed
Under unfavourable conditions, the stroke axle or displace‐
ment body can cause crushing of the fingers.
– Disconnect the pump from the mains power supply and
ensure that it cannot be switched on again by unauthor‐
ised persons.
WARNING!
Risk of injury from the fan impeller
The fan impeller beneath motor's fan cowling can cause
severe injuries while it is turning.
– The pump must only be connected to the mains voltage
with the fan cowling closed.
WARNING!
Warning of dangerous or unknown feed chemical
Should a dangerous or unknown feed chemical be used: It
may escape from the hydraulic components when working
on the pump.
– Take appropriate protective measures before working on
the pump (e.g. safety glasses, safety gloves, ...).
Observe the safety data sheet for the feed chemical.
– Drain and flush the liquid end before working on the
pump.
Unsuitable spare parts for the valves may lead to problems
for the pumps.
– Only use new components that are especially adapted to
fit your valve (both in terms of shape and chemical
resistance).
Use the correct spare parts kits. In case of doubt, refer
–
to the exploded views and ordering information in the
appendix.