Table of Contents
Advertisement
3
Storage, transport and unpacking
Safety notes
Scope of supply
Storage
WARNING!
Only return the metering pump for repair in a cleaned state
and with a flushed liquid end - refer to the chapter "Decom‐
missioning"!
Only return metering pumps with a completed Decontamina‐
tion Declaration form. The Decontamination Declaration con‐
stitutes an integral part of an inspection / repair order. A unit
can only be inspected or repaired when a Declaration of
Decontamination Form is submitted that has been completed
correctly and in full by an authorised and qualified person on
behalf of the pump operator.
The "Decontamination Declaration Form" can be found at
www.prominent.com/en/downloads.
WARNING!
Slings can tear
ProMinent only supplies non-reusable slings. These can tear
with repeated use.
–
Only use the slings once.
CAUTION!
Danger of material damage
The device can be damaged by incorrect or improper storage
or transportation!
–
The unit should only be stored or transported in a well
packaged state - preferably in its original packaging.
–
Only transport the unit when the red gear bleeding plug
is pushed in.
–
The packaged unit should also only be stored or trans‐
ported in accordance with the stipulated storage condi‐
tions.
–
The packaged unit should be protected from moisture
and the ingress of chemicals.
Compare the delivery note with the scope of supply:
Personnel:
n
1.
Plug the caps on the valves.
2.
Check if the red gear bleeding plug is pushed in.
3.
Preferably place the pump standing vertically on a pallet and secure
against falling over.
4.
Cover the pump with a tarpaulin cover - allowing rear ventilation.
Store the pump in a dry, sealed place under the ambient conditions
according to chapter "Technical Data".
Storage, transport and unpacking
Technical personnel
11
Advertisement
Table of Contents
