Operating Mode Settings (Set Menu); Manual" Operating Mode Settings; Analog" Operating Mode Settings (Analg Menu) - ProMinent SCKa Series Operating Instructions Manual

8.5 Operating mode settings (SET menu)

8.5.1 "Manual" operating mode settings

8.5.2 "Analog" operating mode settings (ANALG menu)

Overview
Analog Manual CONTACT Batch
P
Continuous
display
Fig. 18
First in the 'MODE' menu select the operating mode!
Exceptions: Timer and PROFIBUS
In the 'SET' menu, you can make various settings dependent on the
selected operating mode.
Setting menus are available in all operating modes for the following pro‐
grammable functions:
'CALIB' menu)
Calibrate (
n
'AUX' menu)
Auxiliary rate (
n
'FLOW' menu; only available if a dosing monitor is connected) -
Flow (
n
see also the chapter "Programmable function settings (SET menu)".
As to whether or not a further setting menu is available, depends on the
selected operating mode.
Other than those described in more detail in the chapter "Programmable
function settings (SET menu)" there are no other setting menus available
'Manual' operating mode via the 'SET' menu.
in
Alongside those described in more detail in the chapter "Programmable
function settings (SET menu)" the
'Analog' operating mode via the 'SET' menu.
The stroke rate is controlled using an analog current signal via the
"External control" terminal
Analog
- ANALOG
Manual
- MANUAL
P
CONTACT
- CONTACT
Batch - BATCH
B0085
.
®
'ANALG' menu is also available in
Set up
29