IGSMHS Installation and Setup Guide
The IGSMHS comes equipped with an internal antenna. This feature provides additional
security to the installation by making the module tamper resistant.
Dimensions: 8.4" x 8.0" x 1.5"
Weight: 2.4 lbs., with battery
Input Power: 16.5VAC, 40VA transformer, Honeywell Model No. 1361
Current Drain: 65mA average standby, 500mA peak transmit
12VDC from control panel.
Current Drain: 80mA average standby, 650mA peak transmit
UL: Powering the IGSMHS from a control panel has not been evaluated by UL.
Backup Battery: 6V, 3.1AH, Honeywell part number K14139, (included)
Expected Battery Life: 5 Years (approx.)
Fault Relay Output: Open collector, 12VDC, .25W max.
Positive Trigger Level: 6V or greater = positive trigger. (4V or less = restore.)
Negative Trigger Level: 4V or less = negative trigger. (6V or greater = restore.)
Transceiver Type: Quad-Band GSM / GPRS Class 10
Antenna: Internal GSM quad-band antenna 1.3 dBi gain
Network Standard: IEEE 802.3u compliant
Data Rate: 10Base-T / 100Base-T with auto detect
Ethernet Cable: Cat. 5 (min), MDI / MDI-X auto crossover
Primary power loss and low battery conditions.
Cover tamper condition.
External antenna options have not been evaluated by UL.
AMPS antennas, such as the 7825-OC antenna, cannot be used with this product.