Appendix B: Central Station Messages - Honeywell AlarmNet IGSMHS Installation And Setup Manual

Appendix B: Central Station Messages

Alarm Condition
Power On / Reset
Tamper
(Compromise Indication)
Power Loss
Low Battery
Battery Charger Failure
ECP Supervision
(Compromise Indication)
Communication Path Supervision
Telco (Compromise Indication)
Open / Close
Test
Specific to RESIDENTIAL / COMMERCIAL Control Panels (Such as the VISTA-10P, 15P, and 20P series.)
The information provided in this section for the VISTA-10P, 15P, and 20P series control panels
UL
has not been evaluated with this communications module.
xxxxxx
Communicator Trouble (low battery,
ECP buss, network)
(Possible Compromise Indication)
Radio Fault
Specific to COMMERCIAL Control Panels (Such as the VISTA-128 / 250 series.)
Communicator Trouble (low battery,
ECP buss, network)
(Possible Compromise Indication)
Radio Loss of Signal
(Possible Compromise Indication)
Radio Fault (low battery, tamper,
ECP Buss)
AlarmNet Messages
Communication failure.
(Possible Compromise Indication)
Authorized Radio Substitution
Unauthorized Radio Substitution
Attempt
Service Termination
* xx = IGSMHS Device Address
† = Message is sent by dialer only.
‡ = Message is sent by dialer and radio.
◊ = Message is sent by dialer only, or dialer and radio, depending on failure.
ECP Mode
Alarm Code Restore Code
E339 C08xx*
E341 C08xx* R341 C08xx*
E337 C08xx* R337 C08xx*
E338 C08xx* R338 C08xx*
E314 C08xx* R314 C08xx*
E355 C0000 R355 C0000
R350 C0951
5555 5555 9
E353 C08xx* ◊ R353 C08xx* ‡
E353 0 1xx* ‡ R353 0 1xx* ‡
E333 C08xx* ‡ R333 C08xx* ‡
E357 0 8xx* † R357 0 8xx* ‡ or
R380 0 8xx* ‡
E333 0 8xx* ‡ R333 0 8xx* ‡
5555 1555 6 5555 3555 6
00D0 010C 0
00D0 010E 0
00D0 020E 0
Zone and 4204 Modes
Alarm Code Restore Code
5551 5555 6
5555 5551 7 5555 5553 7
1555 5555 6 3555 5555 6
5155 5555 6 5355 5555 6
5155 5555 1 5355 5555 1
5555 5515 5 5555 5535 5
5555 5553 5
5555 5155 6 5555 5355 6
2 sent in selected 4 sent in selected
zone zone
5555 5555 9
B-1