Programmer Keyboard Commands; Module Identification Displays - Honeywell GSMVLP4G Installation And Programming Manual

PROGRAMMER KEYBOARD COMMANDS

Programmer keyboard commands can be used to quickly view your connectivity settings and
options. Most commands require you to press the [shift] key and then the designated
command key. (See the keys designated in red on the 7720P Programming Tool.)
[A]
7845GSM
x.x.xx

Module Identification Displays

[B]
MAC xxxxxxxxxxxx
MAC CRC
SCID xxxxx xxxxx
xxxxx xxxxx
IMEI xxxxxxxx
xxxxxx x
[C]
Mon 01 Jan 2001
05:48:39 am
[D]
Encryption Test
AES Passed!
Software Revision
"x.x.xx" indicates the installed software revision.
mm/dd/yy
Mm/dd/yy indicates month, day and year of the revision.
MAC Address
"xxxxxxxxxxxx" indicates the GSMVLP4G's unique identification
yyyy
number.
"yyyy" indicates the MAC CRC number. These numbers are
found on the label on the module, as well as the label on the box.
Press the [space] key to go to the next field.
Press the [backspace] key to go to the previous field.
SCID Display
Displays the identification number assigned to the SIM card
(SCID) in this device.
Press the [space] key to go to the next field.
Press the [backspace] key to go to the previous field.
IMEI Display
Displays the identification number assigned to the GSMVLP4G
module in this device.
Press the [space] key to get the MAC Address.
Press the [backspace] key to go to the previous field.
Time
Retrieves the current date and time from the AlarmNet network
in Greenwich Mean Time (GMT). This display confirms that the
module is in sync with network.
Encryption Test
Performs a self-test of the AES encryption algorithm.
Press the [Space] key to go to the next field.
Press the backspace [BS] key to go to the previous field.
– 17 –