3700 Series Flat Panel Industrial PC
Canadian Standard Association, Specification C22.2 No. 213-M1987.
• • • •
Non-incendiary electrical equipment for use in Class I, Division 2
Hazardous Locations (cUL Listed, File E180970)
Canadian Standards Association, Specification C22.2 No. 142, (cUL
• • • •
Listed, File E107636)
Suitable for use in Class I, Division 2, Groups A, B, C, and D, and Class II,
Division 2, Groups F and G Hazardous Locations or non-hazardous locations
only.
Substitution of components may impair suitability for Class I, Class II, Division 2.
La substitution de composants peut rendre ce materiel inacceptable pour les
emplamements de classe I, II, Division 2.
Do not disconnect equipment unless the power has been switched off or the
area is known to be non-hazardous.
Avant de deconnecter l'equipment, coupler le courant ou s'assurer que
l'emplacement est designe non dangereux.
When in Hazardous Locations, turn off power before replacing or wiring
modules.
Dans les situations hasardees, couper la courant avant de remplacer ou de
cabler les modules.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Warning
Warning – Explosion Hazard
Avertissement – Risque d'Explosion
Warning – Explosion Hazard
Avertissement – Risque d'Explosion
Warning – Explosion Hazard
Avertissement – Risque d'Explosion
30
Chapter 2 – Installation
143311 (H)
Need help?
Do you have a question about the 3700 Series and is the answer not in the manual?