Table of Contents
Advertisement
Install ACS software
Notes
RNDIS driver
Start ACS software
Log on
28/148
Siemens Building Technologies
HVAC Products
Uninstall any older version of the ACS software before you install the latest ACS
software version on the PC/laptop.
Double-click
in
C:\ACS_CD\Software
Setup.exe
software.
The version is briefly displayed when you start installation of the ACS software. You
can later check the ACS software version only via the "Readme.txt" file.
When you select
ACS Service > Help > About ACS...
version information you need to check.
The RNDIS drivers are saved to folder
(unless you installed the software to a custom location).
The drivers are automatically installed during ACS software installation.
2.3.3 Start ACS software
1.
On the PC/laptop, double-click
to start ACS Service or ACS Operation
2.
Select the desired language and click
3.
Log in with the "Service" level password and click
Commissioning instructions OZW775 V2.01
Recommended commissioning
to start installation of the ACS
, the version displayed here is not the
C:\ACS_CD\Software\Driver\RNDIS
Continue / Weiter
OK
CE1C5663en
22.06.2012
Advertisement
Table of Contents
