Table of Contents
Advertisement
Siemens Building Technologies
HVAC Products
3.
Dialog box "Add / change device" opens. Enter the address values for "Area",
"Line", "Device address" in the corresponding fields.
4.
Click
to add the entries and, as required, enter "Area", "Line", and
Add
"Device address" for additional devices.
Then click
Cancel
5.
In the "Insert devices" dialog box, click
device list. The following actions are carried out automatically:
The central communication unit creates the device list wit the inserted devices
−
and checks the device data.
The ACS reads the inserted device(s) from the central communication unit and
−
refreshes the reference data points.
6.
Close dialog box
ACS Operating – [Edit device
7.
Select
Applications > Popcard...
contains the device(s).
Commissioning instructions OZW775 V2.01
New plant
to return to the "Insert devices" dialog box.
Write device list
list]
.
to open the
[Popcard]
to add the device(s) to the
and check if the device list
CE1C5663en
22.06.2012
41/148
Advertisement
Table of Contents
