Table of Contents
Advertisement
Konnex
Siemens Building Technologies
HVAC Products
Command sequence: Device information > Konnex
Data point
Number of devices max
Default val:
250
Setting val:
Read-only
Number of devices current
Default val:
0...250
Setting val:
Read-only
Last change
Default val:
Weekday, Date
Time
Setting val:
Read-only
4.7.4 Data point "Time of day/date"
Data point "Time of day/date" is displayed multiple times and can be set in the following
applications:
[ Popcard ] "Commissioning mode = On"
[ Popcard ] "Commissioning mode = Off"
[ Popcard ] "Commissioning mode = Off"
Data point
Time of day/date
Default val:
Monday, 1 January 2005 00:00
Setting val:
Date / Time
Commissioning instructions OZW775 V2.01
Parameterize OZW775
Explanation, example
The data point is read-only.
Note: Value = 250 applies to software version
(firmware) V2.02.
The data point is read-only.
Note: The number depends on the project,
whereby the number of devices on the KNX
network is indicated without central
communication unit.
The data point is read-only.
Note: The value displayed comprises weekday,
date and time, e.g. Wednesday March, 26,
2008, 17:34, indicating that the device list was
changed at that point in time.
Operating page "Commissioning"
Operating page "Commissioning"
Operating page "Time / Date"
Explanation, example
The setting values are derived from the current
time (clock time) and the current date.
See Section 5.4.1 on "Time of day and date".
–
–
–
85/148
CE1C5663en
22.06.2012
Advertisement
Table of Contents
