Table of Contents
Advertisement
4.7.3.
62
Hard metal guides replacement
If the hard metal guides cannot be adjusted, they have to be replaced.
Attention:
Hard metal guides must be replaced together on both guiding
cubes!
1.
Disconnect the hose from the cooling agent.
2.
Release 2 screws.
3.
Remove fix hardmetal guidepost.
4.
Release all 3 screws (see arrow).
5.
Release center M10 screew after remove retaining ring.
6.
Remove moveable hardmetal guide.
Manual version:
1.10 / Jan. 2011
Manual rev.:
1
Advertisement
Table of Contents
