Images Viewer Submenu; Figure 29. Setting The Alarm Activation Time; Figure 30. Alarm Show Submenu; Figure 31. Time And Date Not Configured - STMicroelectronics STM32100B-EVAL User Manual

Table of Contents

UM0891

●

Alarm Show: this item displays the current alarm time. The default alarm activation

time displayed after powering up is 00:00:00. The message shown in

displayed on the LCD when this submenu is selected.

To exit the Alarm Show submenu press the SEL push-button. To exit the Alarm submenu,

select Return and press the SEL push-button.

Note:

In the Alarm Adjust and Alarm Show menus, if the time and date have not been

previously configured, the message shown in

2.7.3

Images Viewer submenu

The Images Viewer submenu is used to demonstrate the LCD control performance using

the embedded SPI interface. The application displays successively the images stored on the

MicroSD card.

Figure 31

Doc ID 16982 Rev 1

Running the demonstration

Figure 30

is displayed on the LCD screen.

27/48

Table of Contents

Do you have a question about the STM32100B-EVAL and is the answer not in the manual?