Figure 27. Setting The Day Of The Month; Figure 28. Date Show Submenu - STMicroelectronics STM32100B-EVAL User Manual

Table of Contents

Running the demonstration

Figure 27. Setting the day of the month

●

Date Show: this item displays the current date. If the time and date have not been

previously configured, the message shown in

choice to set the time/date or, to exit to the upper submenu.

To exit this submenu press the SEL push-button. To exit the Date submenu, select Return

and press the SEL push-button.

Alarm submenu

You can use this submenu to configure the alarm activation time. When the alarm time value

is reached, all the LEDs (LED1 to LED4) start flashing simultaneously for 30 seconds. This

submenu is divided into two items to display or set the current alarm.

●

Alarm Adjust: the alarm time activation is set in the same way as in the Time Adjust

submenu. The following messages are successively displayed on the LCD when this

submenu is selected.

26/48

Figure 28

Doc ID 16982 Rev 1

is displayed. You have the

UM0891

Table of Contents

Do you have a question about the STM32100B-EVAL and is the answer not in the manual?