Figure 34. Wave Player Submenu; Figure 35. Wave Player Interface - STMicroelectronics STM32100B-EVAL User Manual

UM0891
the wave signal. The voice sampling period is read from the Wave File Header. An audio
amplifier is connected to the DAC interface to play the stored wave files. This application
illustrates all STM32 DAC features and modes by dedicated examples and lists the
configuration steps for each mode.
This application reads all wave files from the USER directory (see
Programming the media
●
Audio format: PCM (an uncompressed wave data format in which each value
represents the amplitude of the signal at the time of sampling)
●
Sample rate: may be 8000, 11025, 22050 or 44100 Hz
●
Bits per sample: 8-bit (audio sample data values are in the range [0-255] )
●
Number of channels: 1 (Mono)
The Wave Player submenu is shown in

Figure 34. Wave Player submenu

When you select Wave Player, the wave player interface is displayed as shown in

Figure 35. Wave Player interface

In Figure
start-up, to play the file through the embedded speaker, press SEL. To exit the Wave Player
submenu, press DOWN.
Once you select the play command, the submenu shown in
files) and displays only the .WAV files having the following format:
STM32 DAC Audio demo
Playing Wave Files
SEL
DOWN
LEFT
RIGHT -> Previous Wave
USER/xxxxxxxx.WAV
35, the active push-buttons and their functions are displayed. For example, at
Doc ID 16982 Rev 1
Figure 34.
Wave Player
Wave Player
Return
-> Play
-> Return
-> Next Wave
Running the demonstration
Section 4.1:
Figure 36 is displayed.
Figure 35.
29/48