Technical Specifications; General Technical Data Of The Fidamat 6 Gas Analyzers - Siemens FIDAMAT 6 Operating Instructions Manual

Technical specifications

11.1

General technical data of the FIDAMAT 6 gas analyzers

Table 11- 1 Technical specifications – Design, housing
Design, enclosure
Degree of protection
Dimensions
Weight
Table 11- 2 Technical specifications – Electric characteristics
Electrical characteristics
Auxiliary power supply
Power consumption
EMC interference immunity (electromagnetic
compatibility)
Electrical safety
Fuse values
Table 11- 3 Technical specifications – Gas consumption data
Gas consumption data
Combustion air
Hydrogen
Sample gas
Zero gas/ calibration gas
Table 11- 4 Technical specifications – Time response
Time response
Warm-up time (until ready for measurement)
Display delay (T90)
FIDAMAT 6
Operating Instructions, 01/2019, A5E00222135-04
IP20 according to EN 60529
IP40 after installation in analyzer cabinet (FIDAMAT Analyzer System)
See section "Dimension drawings and circuit diagrams" (Page 173)
approx. 23 kg (51 lbs.)
100 to 120 V AC (nominal range of use 90 V to 132 V), 48 to 63 Hz or
200 to 240 V AC (nominal range of use 180 V to 264 V), 48 to 63 Hz
Approx. 150 VA during operation
Approx. 350 VA in the warm-up phase
In accordance with standard requirements of NAMUR NE21 (08/98)
In accordance with EN 61010-1,
Overvoltage category II
100 to 120 V: 4.0 T/250
200 to 240 V: 2.5 T/250
Approx. 350 ml/min
Approx. 12 ml/min
Approx. 1 l/min
Approx. 1.5 l/min
Approx. 3 h at room temperature
2-3 s
11
167