Safety instructions
2.1
Requirements for safe use
In terms of safety, this device left the factory in perfect condition. In order to maintain this
status and to ensure safe operation of the device, observe these operating instructions and
all the information relevant to safety.
Observe the information and symbols on the device. Do not remove any information or
symbols from the device. Always keep the information and symbols in a completely legible
state and renew it, if necessary.
Symbol
2.2
Basic safety instructions
Introduction of combustible gases
Danger of explosion
The device is not designed for measurement of ignitable gas mixtures.
• If the device is used to measure flammable gases that can combine with air or oxygen to
FIDAMAT 6
Operating Instructions, 01/2019, A5E00222135-04
Description
Consult operating instructions
Hot surface
Dangerous electrical voltage
WARNING
form an ignitable gas mixture, take special explosion protection measures!
2
15