Introduction - Danfoss VLT 5000 Series Manual

I Introduction
Manual objectives
The purpose of this manual is to provide the user
with the necessary information to install, program and
start up the Danfoss VLT 5300-5500, VLT 6350-6550
and VLT 8350-8550 frequency converters. This
manual should be read thoroughly before operating,
servicing or initializing the drives. This manual is
intended for use along with the Danfoss Operating
Instructions Manual for the VLT 5000/6000/8000
frequency converters for detailed information.
Who should use this manual
This manual is intended for qualified service
personnel responsible for setting up and servicing
the Danfoss VLT 5300-5500, VLT 6350-6550 and
VLT 8350-8550 frequency converters. Qualified
personnel have previous experience with the
frequency converters and understand electrical
fundamentals, programming procedures, required
equipment and safety precautions.
Organization of the manual
This manual is arranged in equipment installation
and connection sequence. The order of tasks
are arranged as follows:
• Safety instructions
• Transportation and unpacking
•
Technical data
• Mechanical installation
• Pre-installation
•
Electrical installation guidelines
• Control cable routing
•
Connection examples
• Electrical installation procedures
• Motor start
MG.56.A2.02 - VLT is a registered Danfoss trademark
®
VLT 5000/6000/8000 Series
3