Installation
3
Some cell site structures may have existing frameworks for attaching the eNB and antenna.
For purposes of explaining the installation procedure, this section assumes the eNB will be
installed on a support pole or on a wall.
3.1 Process Overview
Figure 3-1 provides an overview of the installation process.
Figure 3-1: Installation Process Overview
3.2 Attach GPS Antenna to eNB
The GPS antenna has been assembled before packing. The only installation step is to fix the
GPS mounting bracket on the eNB using the M4 *14 screws. The GPS will be attached to the
top of the eNB, as shown in Figure 3-2.
13