Operating; Calling With Safeline Sl6; Intercom Between Main Station And Voice Unit; Outgoing Call - Safeline SL6+ Manual

Calling with
SafeLine SL6+
Installing the handset and
the SL6+ in the machine
room is recommended.
The handset can not be
called from the car unit.
Intercom
between Main
Station and
Voice Unit

Outgoing Call

Operating

The SafeLine SL6+ can call in the following ways:
1. Intercom between machine room and car/pit/car-top, see
below.
2. Making calls like with a normal fi xed line phone (also GSM).
3. Emergency calls to numbers at the press of the alarm
button.
4. Test alarms at preset intervals.
5. Send receipts to SLCC alarm receiver for defi ned condi-
tions.
6. Send SMS to one or several GSM phones at defi ned condi-
tions (GSM only).
7. Provoke test calls.
SafeLine SL6
Main station to voice unit
Press 1-6 on the handset to call respective voice unit.
Voice unit to main station
Press the button on the voice station briefl y to call the main
station.
(Hold the button for 5 seconds to make an emergency call.)
Press 0 to dial external telephone number.
If the Safeline SL6+ is connected to a PABX (switchboard),
press 0 again for external dial tone to calling out to the PSTN
network.
If a GSM unit is installed, the SL6+ will use it as the default . If a
PSTN-line is used, ensure that there is NO GMS unit installed.
34
Intercom between machine
room and car/pit/car-top.
EN SL6+ v.3.04