Activating The Sim Card - Safeline SL6+ Manual

Activating the
SIM Card
If you enter the wrong PIN
code 3 times, the SIM card
will be blocked (requires
PUK code to unblock). The
SL6+ can not be started and
the LED3 will turn red.
Installation
The SL6+ can only recognise the PIN code if the code is
set to "1234", "0000", "1111" or is deactivated. If the PIN
code is set to "1234", "0000" or if it is deactivated, the SIM
card can be moved from the SL6+ to any of SafeLine GSM
products.
TIP: Do not activate the voice mail or, if possible, ask your
provider to deactivate the voice mail.
If the PIN code is set to "1111" the SIM card code will
be randomly changed by the SafeLine GSM unit and
memorized. This way the SIM card can only work with
the SafeLine GSM unit unless you use the PUK code for
setting up a new PIN code.
If you want to upload a new SIM card with PIN code "1111"
you will fi rst need to upload a SIM card with PIN code
"1234" or "0000" to clear the old code in memory.
Setting the PIN code
(Set to "1234", "0000" or deactivate.)
1. Insert the SIM card in an ordinary cellular phone. In
the "Security settings" menu, change the PIN code to
"1234". If this is not possible, set the PIN code to "0000"
or set the "PIN code request" option to "OFF" (might
not always function).
2. Verify the PIN code by switching your phone off and
on again.
3. Make a call from your phone to verify that the SIM card
is active before you move it to the SL6+.
4. Also make a call to SL6+ after insertion to check that it
is possible to get a proper connection.
TP5
15
EN SL6+ v.3.04