Startup Procedure - Safeline SL6+ Manual

Startup
Procedure
Startup the SL6+.
1
Connect the battery.
2
Connect 230 VAC.
LED 1
turns green?
Yes
4
SL6+ searches for
connected bus units.
Number of beeps
OK?
Yes
6
SL6+ checks for valid tele-
phone line or GSM net.
LED 3 fl ashing
OK?
Yes

Startup procedure

ready.
Startup
3
No 230 VAC
or broken unit.
No
5
Unit communication
failure.
No
7
No telephone
line or GSM net.
No
18
1 The unit will not start
at battery connection
only.
2 A tone sequence is
heard in the system
speaker at startup.
3 Check 230 VAC mains
power.
4 SL6+ main unit searches
for units connected to
the bus. For every voice
unit found, a beep
sound is heard in the
system speaker in the
SL6+ main unit.
1 2 3 4
Example:
Found all voice units
except for number 3.
5 Refer to chapter:
Trouble shooting Voice
unit.
6
When a valid telephone
line is connected, or
a GSM net is available
LED3 is fl ashing green
every 5 seconds.
7 Refer to chapter: Trou-
ble shooting Main unit.
5 6
EN SL6+ v.3.04