Hardware Preparation And Installation; Overview; Unpacking And Inspecting The Module - SMART Embedded Computing PrAMC-7311 Installation And Use Manual

Hardware Preparation and Installation

2.1

Overview

In this chapter you can find information on the following topics:

Unpacking and inspecting the module


Environmental and power requirements

Configuring the module

Installing module accessories

Module installation and removal

2.2 Unpacking and Inspecting the Module
Damage of Circuits
Electrostatic discharge and incorrect installation and removal of the blade can
damage circuits or shorten their life.
Before touching the blade or electronic components, make sure that your are
working in an ESD-safe environment.
Shipment Inspection
To inspect the shipment, perform the following steps.
1. Verify that you have received all items of your shipment:
–
–
2. Check for damage and report any damage or differences to the customer service.
3. Remove the desiccant bag shipped together with the module and dispose of it
according to your country's legislation.
The blade is thoroughly inspected before shipment. If any damage occurred during
transportation or any items are missing, please contact our customer's service
immediately.
PrAMC-7311 Installation and Use (6806800P34F)
PrAMC-7311 module
Any optional items ordered
Chapter 2
31