Hardware Preparation And Installation; Environmental And Power Requirements; Environmental Requirements; Table 2-1 Environmental Requirements - SMART Embedded Computing COMX-P2020 Installation And Use Manual

Hardware Preparation and Installation

2.1

Environmental and Power Requirements

2.1.1

Environmental Requirements

The following table lists the environmental requirements that the board must meet when
operated in your particular system configuration.
Operating temperatures refer to the temperature of the air circulating around the
board and not to the component temperature.
Product Damage
High humidity and condensation on surfaces cause short circuits.
Do not operate the system outside the specified environmental limits. Make sure the
product is completely dry and there is no moisture on any surface before applying
power.
Table 2-1
Requirement
Cooling Method
Temp Cycle Class
Temperature
Humidity
Vibration
Shock
Altitude
COMX-P2020 Module Installation and Use (6806800K97F)
Environmental Requirements
Operating
Forced-air
-40°C to 85°C:500 cyc
0°C to 55°C
10 to 90% Non-condensing
0.01g^2/Hz at 5-500Hz Random
vibration
20g 11ms sine or saw
-60 to 4000m ASL
NOTICE
Chapter 2
Non-Operating
-40°C to 85°C
-
-
29