Table of Contents
Advertisement
Problem
Gigabit Ethernet
Port 2 cannot be
used.
USB port works
abnormally.
PrAMC-7311 Installation and Use (6806800P34F)
Possible
Solution
Reason
The Centellis 1000
is a single MCH
system and
therefore does not
support the
Check what the shelf type is.
connection of the
second backplane
Ethernet port from
the PrAMC-7311.
USB 2.0
specification
define the power
Check USB device on the face plate USB port and make
budget limit for
sure the power consumption is below 0.5 A.
each port is only
reserve 0.5 A in
minimum.
During Operation
105
Advertisement
Table of Contents
Need help?
Do you have a question about the PrAMC-7311 and is the answer not in the manual?