AT commands
Parameter
0x01
0x02
Parameter
0
1
2
Default
0x00
SB (Stop Bits)
Sets or displays the number of stop bits for UART communications.
Parameter range
0 - 1
Parameter
0
1
Default
0
RO (Packetization Timeout)
Set or read the number of UART character times of inter-character silence required before
transmission begins when operating in Transparent mode.
Set RO to 0 to transmit characters as they arrive instead of buffering them into one RF packet.
Parameter range
0 - 0xFF (x character times)
Default
3
FT (Flow Control Threshold)
Set or display the flow control threshold.
The device de-asserts CTS and/or send XOFF when FT bytes are in the UART receive buffer. It re-
asserts CTS when less than FT-16 bytes are in the UART receive buffer.
XBee 868LP RF Modules User Guide
Description
Even parity
Odd parity
Description
No parity
Even parity
Odd parity
Configuration
One stop bit
Two stop bits
Serial interfacing commands
143