Digital Communicator; Ja-60Gsm Dialer Module; Ja-65X Telephone Communicator; Telephone Numbers For Voice Message Sending - jablotron JA-63 User Manual

c. multiple pressing and holding of the keys (2 or 3) will switch the
bypass on – off – on – off ...
4. By repeating step 3. you can bypass all required alarm sources.
 To close the Bypass menu press the N key. If anything is bypassed when
arming, four beeps will sound and b will be displayed on the keypad during the
exit delay (and partial arming will be recorded to the memory).
 All bypasses selected with key 2 (next arming period bypasses) will switch off
automatically with the first following disarming.
 The existing bypass setting can be checked or modified in the bypass menu.
 All bypasses can be deleted by key 4 in the bypass menu. They can also be
deleted by the programming mode opening or if the control panel is
disconnected from the power completely (AC & back up battery).
To exit user mode press N.

5 Digital communicator

5.1 JA-60GSM Dialer module

If the control panel is equipped with a JA-60GSM communicator, please look at
the JA-60GSM user manual for details about user's setting.

5.2 JA-65X Telephone communicator

If the control panel is equipped with a JA-65X telephone communicator and if
the installer enabled the supervisor to modify the communications settings, only
then will the following programming be possible.
5.2.1

Telephone numbers for voice message sending

Up to 4 telephone numbers can be programmed in the user mode. To switch the
control panel to the user mode enter F 0 master code. User mode will be
indicated by a U on the keypad.
Store telephone numbers for voice message by entering:
7 xx... xx F y
where xx...xx = telephone number
A telephone number can have a maximum of 16 digits. A dialing pause can be
entered with F0
Note: enter a pause (F0) after the last digit of a number, which is calling a
mobile phone. This way the number will be called only once and the dialer will
not check the line signals (some mobile phone systems do not generate standard
telephone line signals).
Alarm system JA-63 „Profi"
y = memory number from 1 to 4
- 11 - MGK51504