3D Systems CubePro Setting Up page 5
Hide thumbs
Also See for CubePro:
- User manual (89 pages) ,
- Replacement manual (52 pages) ,
- Repair manual (40 pages)
Advertisement
CAUTION: The print pad is fragile. Exercise caution when handling the print
pad.
10.
Open the front door. Cut away the zip ties (A) and remove the foam tubing from the
print jet area.
NOTE: For illustration purposes only, the door was removed from the image.
Do not attempt to remove the door from the printer.
11.
Loosen and remove the four (4) 4mm screws securing the Z-Axis guard and remove
the guard. Save the guard and screws for future repacking.
Advertisement
