3D Systems CubePro Setting Up page 4

Hide thumbs Also See for CubePro:

NOTE: Ensure the printer is placed in a location where its size and weight will

be properly supported.

Unpack the top layer of the accessories tray.

NOTE: Depending on the printer conﬁguration, the arrangement of the

accessory boxes may diﬀer. Unpack the power cord (A), the spacer (B),

material cartridge, tool kit and Cube Glue(C). Your conﬁguration may include

1, 2 or three cartridges. For conﬁgurations with fewer than three cartridges

included, empty boxes may be used as spacers.

Unpack the bottom layer of the accessories tray.

NOTE: Depending on the printer conﬁguration, the arrangement of the

accessory boxes may diﬀer. Unpack the print pad (A), the jet wiper assembly

(B), and material cartridges (C). Your conﬁguration may include 1, 2 or 3

cartridges. For conﬁgurations with fewer than three cartridges included,

empty boxes may be used as spacers.

Table of Contents