3D Systems CubePro Setting Up page 10

Hide thumbs Also See for CubePro:

Connect your printer to your wireless network. Use the up or down arrow to scroll to

your network choice. Select your network.

NOTE: If your network is password protected, the printer will ﬁrst prompt you

to enter the password.

NOTE: The printer can also connect to an ad hoc network, a decentralized

network that wirelessly connects a local computer to the printer directly. The

computer must have a wireless adapter conﬁgured for ad-hoc mode. The

adapter must use the same SSID as is found in the printer. Connecting to an

ad hoc network is discussed further in the section titled

Hoc

NOTE: Connection to a network is conﬁrmed when a checkmark appears to

the left of the network name. If the network is secured, a lock icon will

appear to the right of the network name.

Select the

checkmark

Network.

to continue the warranty activation process.

Setting Up an Ad

Table of Contents