Download Print this page

3D Systems CubePro Setting Up page 16

Hide thumbs Also See for CubePro:

NOTE: If the test print ﬁle uses a color that is not installed in the printer,

select the checkmark to enable the printer to change the color of the print to

a color currently installed.

19.

Apply two thin layers of Cube Glue to the print pad. Select the

checkmark

to continue.

NOTE: For more information, refer to the section titled

Applying Cube

Glue.

NOTE: Apply enough glue to cover a square area of 5"/15 cm in the center of

the print pad.

NOTE: For best results, ensure the glue is dry prior to printing.

Table of Contents