3D Systems CubePro Setting Up page 15
Hide thumbs
Also See for CubePro:
- User manual (89 pages) ,
- Replacement manual (52 pages) ,
- Repair manual (40 pages)
Advertisement
17.
(1) Push the front of the cartridge into place. (2) Then, push the cartridge handle
downward until the cartridge is fully seated in its cartridge bay mount. Select the
checkmark
to continue.
NOTE: Ensure the front of the cartridge (A) where the material exits is
seated under the clamp roller and between the vertical alignment pins in the
cartridge bay.
8.
To continue with the test print, select PRINT.
Advertisement
